کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7002204 | 1454787 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Generation of Acoustic Emission from the running-in and subsequent micropitting of a mixed-elastohydrodynamic contact
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents the use of Acoustic Emission to study the running-in and subsequent micropitting of a pair of hardened steel surfaces under mixed lubrication conditions. These surfaces were loaded together under rolling/sliding conditions typical of heavily loaded gearing. Relocation profilometry was used to measure the rapid running-in process and the development of micropits. Acoustic emission (AE) was found to be highly sensitive to both the initial changes in surface topography during the running-in process, and to subsequent changes caused by micropit formation. However, AE appears to be sensitive to changes in asperity interaction rather than the underlying mechanisms of plastic deformation, crack growth and fracture. It is concluded that AE can provide considerable insight into conditions in mixed-elastohydrodynamic contacts.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 119, March 2018, Pages 270-280
Journal: Tribology International - Volume 119, March 2018, Pages 270-280
نویسندگان
S. Hutt, A. Clarke, H.P. Evans,