کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7002340 1454787 2018 25 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
High-stress abrasion of wear resistant steels in the cutting edges of loader buckets
ترجمه فارسی عنوان
سایش زیاد استرس از فولادهای مقاوم در برابر لبه های برش سطل لودر
کلمات کلیدی
ترجمه چکیده
برای شبیه سازی رفتار سایش لبه برش سطل استخراج معدن، آزمایشهای سایش آزمایشگاهی با شدت استرس انجام شده و در مقایسه با آزمایشهای در دسترس است. اثرات پارامترهای آزمون و ساینده های مختلف بر میزان سایش و سازه های پوششی فولاد مقاوم در برابر سایش با استفاده از دیگ بخار با سرعت بالا با تخت سایشی خشک (دیگ خشک) و در استفاده واقعی به عنوان یک برش حاشیه، غیرمتمرکز. تست های آزمایشی آزمایشگاهی نتایجی را تولید می کنند که با مشاهدات موردی قابل مقایسه است. به خصوص در سرعت چرخش نمونه با گرانیت به عنوان یک ساینده، نرخ سایش کاملا مشابه بود که از لبه برش یک سطل لودر که در یک معدن مورد استفاده قرار گرفته بود کاملا مشابه بود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
To simulate the wear behavior of the cutting edge of the mining load-haul-dumper bucket, high-stress abrasion laboratory wear tests were conducted and compared to the in-service tests. The effects of test parameters and different abrasives on the wear rates and wear mechanisms of wear resistant steels were studied using the high-speed slurry-pot with a dry abrasive bed (dry-pot) and in the actual in-service use as a cutting edge. The laboratory wear tests produced results that are well comparable with the in-service case observations. Especially at the higher sample rotation speed with granite as an abrasive, the wear rates were quite similar as determined from the cutting edge of a loader bucket that had been used in a mine.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 119, March 2018, Pages 707-720
نویسندگان
, , ,