کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7002383 1454788 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Modelling and analysis of elastic and thermal deformations of a hybrid journal bearing
ترجمه فارسی عنوان
مدل سازی و تجزیه و تحلیل تغییرات الاستیک و حرارتی یک تحمل مجله ترکیبی
کلمات کلیدی
روانکاری هیدرودینامیک، تغییر شکل، تحمل مجله، تحمل هیبرید پلیمر،
ترجمه چکیده
تقاضای پیوسته برای تراکم توان بالاتر منجر به یک محیط عملیاتی بسیار پیچیده برای لغزش یاتاقان ها در برابر فشار و تغییر شکل می شود. درک رفتار تغییر شکل از یاطاقان لولا به شدت لمس می شود، حتی زمانی که طراحی چند لایه هیبرید مدرن در نظر گرفته شده است. هدف از این مطالعه، توسعه یک مدل عددی، چند فیزیکی برای ارزیابی عملکرد تحمل پذیری مجله است. هیدرودینامیک بر اساس معادله رینولدز بود و تغییر شکل ها با استفاده از روش عددی محدود شده محاسبه شد. تغییر شکلهای ارتجاعی و حرارتی بر روی عملکرد بلبرینگ اثر قابل توجهی دارد و این تغییرات را می توان با خواص لایه های پلیمری تنظیم کرد. طراحی یاتاقان های هیبریدی ظریف است و خواص آنها باید با توجه به شرایط عملیاتی طراحی شده باشد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
The continuous demand for higher power density leads to a very challenging operational environment for sliding bearings regarding pressures and deformations. Understanding of the deformation behavior of heavily loaded bearings becomes even more pronounced when modern hybrid multilayer designs are considered. The aim of this study is to develop a numerical, multi-physical model for the evaluation of journal bearing performance. Hydrodynamics were based on the Reynolds equation and deformations were calculated using the integrated finite element method. Elastic and thermal deformations have a significant effect on bearing performance and those deformations can be adjusted with properties of polymer layer. The design of hybrid bearings is delicate and their properties must be tailored according to the operating conditions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 118, February 2018, Pages 451-457
نویسندگان
, , , , ,