کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7002387 | 1454788 | 2018 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Investigation of tribological behaviour of a-C:H coatings for dry deep drawing of aluminium alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Lubricant-free sheet metal forming increases resource efficiency and contributes to environmental protection. However, the direct contact between work tool and workpiece leads to increasing friction and wear. One approach to reducing friction and wear in dry forming is the tool-sided application of carbon-based coatings. In this work, amorphous hydrogenated carbon (a-C:H) coatings were prepared by plasma-enhanced chemical vapour deposition (PECVD). The coating samples were deposited under different amounts and ratios of acetylene and argon gas atmospheres. The coating samples were characterised regarding their thickness and mechanical as well as chemical bond structures. The tribological behaviour against aluminium alloys was investigated under lubricant-free conditions with a ring-on-disc tribometer. Finally, one a-C:H coating variant with promising tribological performance against aluminium alloys was exemplarily tested in a flat strip drawing test, which models the tribological conditions in the flange area of a deep drawing process. With help of the test results, the friction and wear mechanisms during dry sliding in both closed and open tribological systems were discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 118, February 2018, Pages 484-490
Journal: Tribology International - Volume 118, February 2018, Pages 484-490
نویسندگان
Rong Zhao, Jennifer Steiner, Kolja Andreas, Marion Merklein, Stephan Tremmel,