کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7002711 | 1454811 | 2016 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Hemispherical structures with different area densities and depths were fabricated by hot micro-coining on stainless steel samples. The tribological properties were studied using a ball-on-disc tribometer in rotational sliding mode with different sliding velocities in order to study the frictional behaviour under different lubricated conditions. For low sliding velocities (mixed EHL), all coined surfaces demonstrate a significant friction reduction, whereas only some of the structures lead to an improved frictional behaviour under full-film EHL (higher velocities). Furthermore, the influence of an additional pressure build-up and cavitation is discussed. The largest improvement (friction reduction by a factor of 3 for all velocities) is achieved using a pattern with a pocket depth of 25 μm and an area density of 5%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 95, March 2016, Pages 290-297
Journal: Tribology International - Volume 95, March 2016, Pages 290-297
نویسندگان
Andreas Rosenkranz, Adam Szurdak, Carsten Gachot, Gerhard Hirt, Frank Mücklich,