Effect of grain size and hardness on fretting wear behavior of Inconel 600 alloys

The effects of grain size and bulk hardness on fretting wear behaviors were investigated by solution annealing and subsequently fretting wear test in Inconel 600 alloys. The results indicated that, with increase of solution temperature, the grain size increased while the hardness decreased. The average friction coefficients were the almost same, independent of grain size and hardness; while the wear volume decreased with increase of grain size, but the hardness played little role. The smaller grain was conductive to formation of tribological transformed structure (TTS) layer, and produced shorter delamiantion cracks in the TTS layer than larger one.