کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7003314 | 1454831 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tribocorrosion mechanisms of NiCrMo-625 alloy: An electrochemical modeling approach
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The analysis presented in this work provides a tentative explanation to the large wear rate differences registered in the normal load range of 6-70Â N for the sliding tribocorrosion of NiCrMo625 alloy in 3.4%wt NaCl aqueous solution by means of making the association of volume loss and wear track surface morphology with the CoF values measured. A transition from a nanowear mechanism towards fatigue wear was found to occur between 15Â N and 35Â N normal load. Furthermore, mathematical modeling of the tribocorrosion parameters at high loads have enabled to monitor the time evolving wear characteristics of this process and have assisted in confirming the influence of the changing surface condition of the counterpart and of the contact area curvature on the observed wear. The triboelectrochemical model prediction of the ideal OCP behavior over the experimental time domain provided insight to the increasing potential divergence measured after 300Â s, proven to be an effect of the presence of debris particles. A correlation between the varying wear rate, the contacting surface topography and the recorded variations in the CoF over the 3000Â s time domain of continuous tribocorrosion at 35Â N against alumina, is also proposed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 73, May 2014, Pages 177-186
Journal: Tribology International - Volume 73, May 2014, Pages 177-186
نویسندگان
N. Papageorgiou, A. von Bonin, N. Espallargas,