کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7003414 | 1454834 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel
ترجمه فارسی عنوان
از مکانیسم های چندین ابزار برش در چرخاندن سخت فولاد کربن و کروم بالا استفاده کنید
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
The present study illustrates the performance of three different cutting tool materials, namely: PCBN, TiN coated PCBN, and mixed aluminum ceramic (Al2O3+TiC) in the turning of medium hardened D2 tool steel (52 HRC). Formation of Cr-O tribofilms on the ceramic tool surface as a result of interaction with the workpiece material and environment (identified by X-ray Photoelectron Spectroscopy) leads to improvement of lubricating properties at the tool/chip interface. Obtained results revealed that the mixed alumina ceramic tool can outperform both types of PCBN under different machinability criteria.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 70, February 2014, Pages 148-154
Journal: Tribology International - Volume 70, February 2014, Pages 148-154
نویسندگان
M.A. Shalaby, M.A. El Hakim, Magdy M. Abdelhameed, J.E. Krzanowski, S.C. Veldhuis, G.K. Dosbaeva,