Enlarged phase velocities of ultra-wideband surface acoustic wave devices with relaxor based ferroelectric single crystal/diamond layered structure

• The Vp can be doubled with extremely large K2 for layered structure of relaxor based ferroelectric single crystal on diamond
• The unwanted resonances could be suppressed sufficiently by properly controlling structural parameters.
• Such layered structure makes relaxor crystals promising candidates for ultra-wideband RF SAW devices.

The surface acoustic wave (SAW) characteristics of Y-cut X propagating Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (YX-PIMNT) single crystals on a diamond substrate have been theoretically calculated. The simulated results show that the phase velocity of the shear horizontal (SH) SAW may be greatly enhanced from the 1350 m/s to 3350 m/s by reducing the thickness of the PIMNT from 0.5λ to 0.05λ, with a corresponding decrease in the electromechanical coupling factor (K2) from 73.6% to 19.6%. The dispersion curves of phase velocity and K2 as a function of PIMNT thickness are given for the proposed layered structure. Besides the SH SAW, there are also higher order modes that would cause unwanted responses in the pass-band of wideband SAW filters. These were suppressed by properly controlling structural parameters including top electrode thickness, thickness and Euler angle (θ) of PIMNT substrate. The calculated results demonstrate the effectiveness of this approach to enlarge the phase velocity of the SH SAW without dramatically sacrificing its K2, which makes relaxor based ferroelectric single crystals promising for realizing ultra-wideband SAW devices working in ~ GHz range.