کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7020809 | 1455997 | 2016 | 20 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
MIL-125(Ti) based mixed matrix membranes for CO2 separation from CH4 and N2
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تصفیه و جداسازی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Mixed matrix membranes (MMMs) were developed by adding MIL-125(Ti) and the amine-functionalized counterpart as fillers to Matrimid® polyimide. Through a well-optimized synthesis, strong performing MMMs with loadings up to 30Â wt% could be prepared. SEM images of the synthesized MMMs confirmed the good adhesion to and dispersion of the fillers within the polymer matrix. Significantly improved CO2 mixed gas selectivities and permeabilities for (50:50) CO2:N2 and CO2:CH4 gas mixtures at 9Â bar and 308Â K were achieved. The separation results demonstrated that the overall separation efficiency is increased by the addition of both MIL-125 and NH2-MIL-125 fillers but that the NH2-functionalized filler is preferred as it leads to higher selectivities and permeabilities. The performance of the membranes was compared to previously reported literature data for (CO2:CH4) separation which shows that carefully tuned membrane synthesis procedure along with right selection of polymer and filler are crucial factors to get a highly selective and permeable membrane. Among non-fluorinated polymers forming the membrane matrix, present data outperform all previously reported MMM separation. MMMs based on fluorinated polyimide showed slightly higher selectivities, but much lower permeabilities.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Membrane Science - Volume 502, 15 March 2016, Pages 21-28
Journal: Journal of Membrane Science - Volume 502, 15 March 2016, Pages 21-28
نویسندگان
M. Waqas Anjum, B. Bueken, D. De Vos, Ivo F.J. Vankelecom,