An efficient purification method for detonation nanodiamonds

This article reports the purification process of detonation soot to obtain pure nanodiamond powder. Nanodiamonds are synthesized by detonation using a high explosive mixture composed of trinitrotoluene and hexogen. The detonation of the charge leads to a powder containing nanodiamonds as well as metallic impurities and sp2 carbon species. Further, to remove metallic particles, an unusual acidic treatment (hydrofluoric/nitric acids; i.e. fluorinated aqua regia) was set up. To eliminate sp2 carbon species such as graphite and amorphous carbon, a thermal oxidation treatment was performed at 420 °C under air in a furnace during several hours. Transmission Electronic Microscopy, Raman spectroscopy, X-ray diffraction and Thermo-Gravimetric Analysis showed that this purification process is very efficient. From TGA measurements, a model of the carbon grain combustion was developed by considering graphitic shells surrounding the nanodiamond particles, and was used to demonstrate that the selective oxidation of graphite was experimentally realistic. Moreover, another model was set up from specific area measurements to evaluate the thickness of the functional groups surrounding the nanodiamonds after the oxidation of sp2 carbonaceous species. The treatment described herein was achieved on several tens of grams of product and could be easily adapted to the industrial scale.