Hardness of nanocomposite a-C:Si films deposited by magnetron sputtering

Hydrogen-free a-C:Si films with Si concentration from 3 to 70 at.% were prepared by magnetron co-sputtering of pure graphite and silicon at room temperature. Mechanical properties (hardness, intrinsic stress), film composition (EPMA and XPS) and film structure (electron diffraction, Raman spectra) were investigated in dependence on Si concentration, substrate bias and deposition temperature. The film hardness was maximal for ∼ 45 at.% of Si and deposition temperatures 600 and 800 °C. Reflection electron diffraction indicated an amorphous structure of all the films. Raman spectra showed that the films in the range of 35–70 at.% of Si always contain three bands corresponding to the Si, SiC and C clusters. Photoelectron spectra showed dependency of Si–C bond formation on preparation conditions. In the films close to the stoichiometric SiC composition, the surface and sub-surface carbon atoms exhibited dominantly sp3 bonds. Thus, the maximal hardness was observed in nanocomposite a-C:Si films with a small excess of carbon atoms.