Adaptive setting of distance relay for MOV-protected series compensated line considering wind power

• Adaptive distance relay setting for series compensated line is proposed.
• Distributed parameters of very long transmission line are taken into account.
• The influence of MOV/capacitor impedance is considered in the algorithm.
• Remote information are used for the adaptive setting.
• Intermittent effect of wind power source on the adaptive setting is studied.

Series compensated lines are protected from overvoltage by metal-oxide-varistors (MOVs) connected in parallel with the capacitor bank. The nonlinear characteristics of MOV devices add complexity to fault analysis and distance protection operation. During faults, the impedance of the line is modified by an equivalent impedance of the parallel MOV/capacitor circuit, which affects the distance protection. The intermittent wind generation introduces additional complexity to the system performance and distance protection. Wind variation affects the fault current level and equivalent MOV/capacitor impedance during a fault, and hence the distance relay operation. This paper proposes an adaptive setting method for the mho relay distance protection of series compensated line considering effects of wind power variation and MOV operation. The distributed parameters of a transmission line are taken into account to avoid overreaching and underreaching of distance relays. A test system is simulated, and results demonstrate the ability of the proposed method to resetting the distance relays to adapt to various system conditions, including three wind generation and different compensation levels.