کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7051772 | 1457383 | 2018 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental investigation on hot water seal over an analogous U-shaped device
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A scale ration of 1:1 test loop was constructed to investigate the water seal formation phenomenon in front of pressurizer safety valve in nuclear plant. The water seal features were investigated under the condition of pressure ranging from 0.15 to 0.55â¯MPa. The test was placed in a room with air conditioner to make sure the temperature in the room is keep relative stability thermal conditions, the temperature in the room may fluctuation between 20° and 25°. Water level oscillates in the process of water seal stabilization, the experimental data fit very well with the proposed model in the paper. The water seal formation time reduced significantly with pressure increasing and air concentration decreasing. Refilling of the pipe is much more rapid than the initial one due to a lower content of non-condensable gases remaining in the steam. Finally, the water seal starting point judgment method has been put forward in this paper.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Experimental Thermal and Fluid Science - Volume 93, May 2018, Pages 23-31
Journal: Experimental Thermal and Fluid Science - Volume 93, May 2018, Pages 23-31
نویسندگان
Bing Tan, Y.W. Wu, Y. Xiang, Yongzheng Chen, Leishi Tai, W.X. Tian, S.Z. Qiu, G.H. Su,