کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7052084 1457406 2016 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Flow pattern transition models and correlations for flow boiling in mini-tubes
ترجمه فارسی عنوان
مدل های انتقال الگوی جریان و همبستگی برای جوش جریان در مینی لوله ها
کلمات کلیدی
جریان جوش، لوله های کوچک، الگوهای جریان، همبستگی،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
An evaluation of models and correlations predicting flow patterns in mini-tubes is described in this paper and final recommendations are made for a way forward. Flow boiling patterns of R245fa in a 1.1 mm diameter copper tube were used in this evaluation. The experiments covered an experimental range of mass flux 100-400 kg/m2 s, heat flux 3-25 kW/m2, inlet pressure of 1.85 and inlet subcooling of 5 K. Hysteresis was evident in these experiments across the whole range, with obvious changes in the flow patterns between increasing and decreasing heat flux. The four main flow patterns were bubbly, slug, churn and annular flow. Confined flow was also evident. For increasing heat flux, only annular flow was evident but all the flow patterns were evident with decreasing heat flux. Therefore, the evaluation of flow pattern maps carried out in this study was based on the decreasing heat flux data, as this covered the full range of flow patterns. The evaluation of more than ten models and correlations demonstrated that there is no general model that can predict accurately all flow pattern transition boundaries. Only one model succeeded in predicting all transition boundaries very well, except the bubbly to slug transition. Thus, a new modification on this boundary is proposed in this paper that could predict the experimental data used in this study very well.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Experimental Thermal and Fluid Science - Volume 70, January 2016, Pages 270-282
نویسندگان
, ,