Power flow model/calculation for power systems with multiple FACTS controllers

This paper presents a new procedure for steady state power flow calculation of power systems with multiple flexible AC transmission system (FACTS) controllers. The focus of this paper is to show how the conventional power flow calculation method can systematically be modified to include multiple FACTS controllers. Newton–Raphson method of iterative solution is used for power flow equations in polar coordinate. The impacts of FACTS controllers on power flow is accommodated by adding new entries and modifying some existing entries in the linearized Jacobian equation of the same system with no FACTS controllers. Three major FACTS controllers (STATic synchronous COMpensator (STATCOM), static synchronous series compensator (SSSC), and unified power flow controller (UPFC)) are studied in this paper. STATCOM is modeled in voltage control mode. SSSC controls the active power of the link to which it is connected. The UPFC controls the active and the reactive power flow of the link while maintaining a constant voltage at one of the buses. The modeling approach presented in this paper is tested on the 9-bus western system coordinating council (WSCC) power system and implemented using MATLAB software package. The numerical results show the robust convergence of the presented procedure.