Impact of different establishment methods in terms of tillage and weed management systems on biomass production of willow grown as short rotation coppice

To date little information is available on methods including soil preparation and weed control in SRC. For this purpose, in 2010, a field trial with willow cv. 'Tordis' was established in southwest Germany. Three different tillage systems (mouldboard plough, chisel plough + ley crop, no-till) were implemented in the establishment year in combination with eight chemical and mechanical weed management systems. Over a period of three years, plant and weed specific parameters were collected to determine the effect of tillage systems and weed treatments on final biomass production of willow. The highest biomass yields were obtained by mouldboard plough with chemical weed control (14.0 Mg ha−1 dry matter) as well as by mouldboard plough with rotivation and band spraying of herbicides (14.2 Mg ha−1 dry matter), followed by 13.7 Mg ha−1 dry matter in no-till with broadcast application of herbicides. Chisel ploughing with ley crop led to lower willow yields in most weed treatments. It was assumed that chisel ploughing + ley crop would lead to a high competition for light, water and nutrients especially in the first year. Consequently, it is not recommended as an establishment method for willow. Additionally, mulching with wood chips and no weed management generally resulted in low biomass yields. Overall, the results suggest that the tillage system in combination with effective chemical or mechanical weed control is of major importance for the success of willow establishment.