کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7105278 1460481 2018 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of modified cellulose nanocrystals (CNC) on performance of bionanocomposite coatings
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
پیش نمایش صفحه اول مقاله
Influence of modified cellulose nanocrystals (CNC) on performance of bionanocomposite coatings
چکیده انگلیسی
In this study, a renewable reinforcement, namely cellulose nanocrystals (CNC), was used to develop a bio-based nanocomposite UV-cured coating system with improved performance. CNC was modified in order to be compatible with the nonpolar polymer matrix (acrylated epoxidized soybean oil (AESO)). The CNC was modified by two methods, with acryloyl chloride or a cationic surfactant (HDTMA). The mechanical properties and structure of bionanocomposites were evaluated. The addition of CNC increased modulus of elasticity (MOE) and tensile strength of the cured film coatings. Use of CNC modified by HDTMA and acrylated CNC led to a higher increase in tensile strength and MOE, relative to un-modified CNC. Best performance enhancement was in hardness and reduced elastic modulus (Er), measured by the nanoindentation technique, which were improved several fold by CNC addition. Hardness, Er, MOE and tensile strength increased with CNC loading level in the matrix. Hardness measurements of cured film coating by pencil hardness test methods confirmed that CNC improved the hardness of the films. Studying the morphology of the nanocomposites revealed that surface modification method of CNC affected nanocomposite film structure and thus the mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Progress in Organic Coatings - Volume 123, October 2018, Pages 27-34
نویسندگان
, , , , , ,