Enhanced controller for grid-connected modular multilevel converters in distorted utility grids

This paper is about the control of Modular multilevel converters, an innovative technology in the design of converters, which is beginning to be included in real installations. Papers about this topic include simulation models, circulating current reduction, voltage modulators, capacitor voltage balancing and control issues. The scheme for current source regulation used in this article includes all control loops, which are, from the outermost to innermost, DC bus voltage regulator, current regulator, voltage modulator, capacitor voltage balancing, and a PLL for the synchronization to the grid. Disposition-sinusoidal pulse width modulation is used as the voltage modulator, and an enhanced control strategy in the stationary reference frame for 3-phase MMCs is used for the inner current control loops. Very detailed simulations of the complete control system have been performed for both the enhanced control strategy in the stationary reference frame, and the well-known control in the synchronous reference frame, as well as some experiments using the hardware-in-the-loop simulation technique. The validation of these control strategies is made by a comparison of the capability of each one to compensate the harmonic distortions of the utility grid according to the grid code. The correct operation has been tested in the case of a strong/weak grid, unbalances and grid failures.