کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7121352 | 1461467 | 2018 | 23 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Investigations of mechanical, thermal and morphological properties of FDM fabricated parts for friction welding applications
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Friction welding is one of the solid state welding techniques, for which the two pieces of thermoplastic materials must be compatible to each other. Friction welding of the two similar thermoplastic is an easy exercise but joining two dissimilar thermoplastic is difficult because of large differences in viscosity, specific density, molecular weight, melting point, crystalline vs. amorphous nature, surface behavior and dynamic-mechanical properties. In last three decades, studies have been reported to perform the friction and friction stir welding of thermoplastics but still the reason for compatibility of thermoplastic is not understood properly. In the present study attempts have been made to perform the compatibility analysis of two dissimilar polymers namely; acrylonitrile butadiene styrene (ABS) and polyamide 6 (PA6) by establishing their melt flow properties after Aluminum (Al) metal powder reinforcement. Twin screw extrusion (TSE) and fused deposition modeling (FDM) technologies were used to fabricate the welding specimen for potential application in maintenance engineering.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 120, May 2018, Pages 11-20
Journal: Measurement - Volume 120, May 2018, Pages 11-20
نویسندگان
Ranvijay Kumar, Rupinder Singh, I.P.S. Ahuja,