Investigations on the effects of Nano-fluid in ECM of die steel

Formation of spikes in the electrochemically machined workpiece prevents to achieve the better performance of ElectroChemical Machining (ECM). Hence, this research work attempts to investigate the effects of Nano-fluid i.e. Nano Copper particles suspended NaCl electrolyte on the ECM of High carbon high chromium (HCHCr) die steel with a hardness of 63HRc. The influencing parameters are voltage, tool feed rate and electrolyte discharge rate with mixing levels. Seventy-two experiments have been conducted using Nano-fluid and plain NaCl electrolyte based on design of the experiment. The Nano Copper particles in the electrolyte break the gas layer at the inter electrode gap resulting in better MRR and surface roughness due to improved current density across the gap. A maximum MRR of 458.869 mm3/min and a minimum surface roughness of 1.39 μm Ra are obtained using Nano-fluid. The developed ANOVA models prove the significances of influencing factors in obtaining the better performance of ECM.