کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7124969 | 1461529 | 2014 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Monitoring surface roughness of thin-walled components from steel C45 machining down and up milling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Article deals with problematic of milling thin wall components, than about study of surface roughness and analytical prediction of surface roughness Rz for variable geometrical parameters. First part is dedicated to research of realized experiments of manufacturing thin wall components, what was basis for designing of experiment. Experiment was conducted in two phases, where first was based on up milling and second on down milling for left and right side of thin wall components with thickness 10Â mm. Subsequently, the surface roughness Rz was evaluated and was determinate mathematical equations for each type of milling, side and also for each depth. Final output of presented article is mathematical model of surface roughness Rz prediction for constant cutting conditions, but for variable geometrical parameters of thin wall components with thickness 10Â mm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 58, December 2014, Pages 416-428
Journal: Measurement - Volume 58, December 2014, Pages 416-428
نویسندگان
Peter Michalik, Jozef Zajac, Michal Hatala, Dusan Mital, Veronika Fecova,