کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7158284 1462794 2018 14 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermal performance and second law characteristics of two new microchannel heat sinks operated with hybrid nanofluid containing graphene-silver nanoparticles
ترجمه فارسی عنوان
عملکرد حرارتی و خصوصیات دوم قانون دو غربال گرهای جدید میکرو کانال با نانوذرات نقره گرافن حاوی نانوسیم های ترکیبی
ترجمه چکیده
این مطالعه به بررسی جریان، انتقال حرارت و خصوصیات دوم قانون نانوذرات نقره گرافنی حاوی نانوفیلد هیبرید داخل دو غرقاب کننده جدید میکرو کانال می پردازد. خواص ترموفیزیکی وابسته به دما در شبیه سازی استفاده می شود. از آنجا که جریان یکنواخت بین کانال های غرق می شود، یک توزیع درجه حرارت یکنواخت بر روی سطح گرما به دست می آید. با افزایش سرعت و یا غلظت در هر دو غرق گرما، دمای سطح کاهش می یابد؛ یکنواختی خنک کننده بهبود می یابد؛ و حداکثر دمای نیز کاهش می یابد که باعث کاهش احتمال تشکیل نقطه داغ می شود. افزون بر این، افزایش سرعت یا غلظت، باعث افزایش قدرت پمپاژ در هر دو گرما می شود. شکل شایستگی، به عنوان مثال، نسبت افزایش افزایش انتقال حرارت به افزایش فشار در مورد استفاده از نانوسیم به جای آب خالص، ارزش بیشتری برای تخلیه گرما با تغییرات مسیر بیشتر را نشان می دهد. نتایج نشان می دهد که انتقال حرارت سهم بیشتری در تولید آنتروپی نسبت به اصطکاک دارد. علاوه بر این، مقدار بیشتری از آنتروپی حرارتی تولید شده در غرق گرما در قسمت مایع اتفاق می افتد. بر اساس نتایج بدست آمده مشخص شده است که استفاده از نزول گرما با تغییر مسیر بیشتر و همچنین استفاده از نانوفیلد به عنوان انتقال مایعات گرما می تواند گزینه های امیدوار کننده در خنک سازی الکترونیک در مورد قوانین اول و دوم ترمودینامیک باشد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
This study attempts to evaluate the flow, heat transfer and second law characteristics of a hybrid nanofluid containing graphene-silver nanoparticles inside two new microchannel heat sinks. The temperature dependent thermophysical properties are employed in the simulations. Because the flow is divided uniformly between the channels of heat sinks, a rather uniform temperature distribution is obtained on the heating surface. By increasing either velocity or concentration at both heat sinks, the surface temperature reduces; the cooling uniformity improves; and the maximum temperature also decreases which reduces the possibility of hot spot formation. Moreover, increase of the velocity or concentration intensifies the pumping power in both heat sinks. Figure of merit, i.e. the ratio of heat transfer enhancement to pressure drop increment in the case of using the nanofluid instead of pure water, shows a greater value for the heat sink with more path changes. The results reveal that the heat transfer has a greater contribution in the entropy generation compared to the friction. Moreover, greater fraction of thermal entropy generated in the heat sinks occurs in the fluid part. Based on the results obtained, it is found that employing the heat sink with more path changes and also using the nanofluid as heat transfer fluid can be promising options to be utilized in electronics cooling regarding both first and second laws of thermodynamics.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 168, 15 July 2018, Pages 357-370
نویسندگان
, ,