کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7171267 1463707 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimal design of deformation near a hole in an oxide forming alloy foil under thermal cycling using taguchi method
ترجمه فارسی عنوان
طراحی مطلوب تغییر شکل در نزدیکی یک سوراخ در فویل آلومینیوم تشکیل اکسید تحت سیکلینگ حرارتی با استفاده از روش تگچی
کلمات کلیدی
تیغه توربین گاز، اکسید رشد شده به صورت حرارتی، روش تاگوچی،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
Recently, an idealized cooling hole was studied to evaluate the durability of gas turbine blades. A theoretical model was derived and the results were close to experimental measurement. In this work, the effects of various design parameters on the hole deformation under thermal loading were evaluated using validated analytical model. Specifically, a sensitivity study of the growth strain of thermally grown oxide (TGO), the yield strength of TGO and the substrate, and the hole diameter were performed using the taguchi method. The sensitivity study revealed that the growth strain, εg, was the dominant influential design parameter on the final hoop strain near the hole during the 20 thermal cycles, followed by the compressive yield strength of the TGO layer at RT and the tensile yield strength of the TGO layer at 1200 °C. The yield strength of the substrate layer at RT was the least influential design parameter.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 116, November 2018, Pages 293-299
نویسندگان
, ,