کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7171294 | 1463707 | 2018 | 31 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Do corrosion pits eliminate the benefit of shot-peening?
ترجمه فارسی عنوان
آیا گودال های خوردگی از نفوذ شکنی استفاده می کنند؟
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ساچمه زنی، پیتینگ، خستگی، تجزیه و تحلیل عنصر محدود،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The impact of corrosion pits on the beneficial effect of shot-peening of 12Cr steam turbine blade steel has been evaluated under fatigue loading conditions in air. The fatigue limit was measured for pits of depth in the range 50â¯Î¼m-300â¯Î¼m, typical of depths to be expected in a reasonably well-managed operating plant but with occasional transient excursions in water chemistry. X-ray diffraction (XRD) measurements indicated that the compressive residual stress approached zero at a depth of about 250â¯Î¼m, yet a significant benefit of this residual stress on the fatigue limit was still retained with the pit of depth 300â¯Î¼m. An explanation could be found in finite element analysis, which predicted a reduced net tensile stress range and mean stress at the base of the pit in the shot-peened specimen. The fatigue crack growth rate from a corrosion pit was also reduced by the residual stress, until the crack attained a depth of 0.9â¯mm. well beyond the depth of compressive residual stress. An explanation based on constraint to lateral crack propagation near the surface and its impact on stress intensity factor at the crack base is proposed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 116, November 2018, Pages 439-447
Journal: International Journal of Fatigue - Volume 116, November 2018, Pages 439-447
نویسندگان
A. Turnbull, L. Crocker, S. Zhou,