کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7178599 1467423 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of size on necking of dynamically loaded notched bars
ترجمه فارسی عنوان
اثر اندازه بر روی گردن از میله های دندانه دار بارگذاری شده است
کلمات کلیدی
ترجمه چکیده
تأثیر ماندگاری ماده بر روی رشد گردن در یک ردیف دور برهنه به صورت عددی تحلیل می شود. محاسبات محوری پویا برای سخت شدن ایزوتروپیک جامدات کششی-ویسکوزوپلاستی انجام می شود، به طوری که هر حساسیت سرعت کشش مواد و مجهز بودن ماده در نظر گرفته شده است. تمرکز بر روی اثر اندازه نوار بر این است که آیا این مرحله باعث می شود که گردن و یا گردن به دور از شکاف شروع شود. معادلات حاکم در شکل غیرمستقیم و دو گروه کلیدی غیرمستقیم که هر دو شامل مواد و پارامترهای بارگذاری هستند شناسایی می شوند. برای هر دو گروه بی ثباتی، با تمام پارامترهای ثابت به جز اندازه نوار، مشخص شده است که برای کافه ها به اندازه کافی کوچک، شکاف باعث گرد و غبار، در حالی که برای میله های به اندازه کافی بزرگ قدم زدن در نهایت به دور از شکاف رخ می دهد. با خصوصیات مواد ثابت شده است، برای یک گروه غیرمستقیم، گذار به گردن به دور از پیک مربوط به افزایش سرعت تحمیل شده است، در حالی که برای گروه دیگر غیرمستقیم این گذار برای کاهش میزان فشار اعمال شده اعمال می شود. هر دو این انتقال به افزایش اندازه نوار بستگی دارد. نتایج نشان می دهد که این انتقال از طریق ماتریس ماده کنترل می شود اما اندازه نوار که در آن رخ می دهد بستگی به خواص مواد، به ویژه سخت شدن فشار و سخت شدن فشار است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
The influence of material inertia on neck development in a notched round bar is analyzed numerically. Dynamic axisymmetric calculations are carried out for isotropically hardening elastic-viscoplastic solids so that both material strain rate sensitivity and material inertia are accounted for. The focus is on the effect of bar size on whether the notch triggers necking or necking initiates away from the notch. The governing equations are presented in non-dimensional form and two key non-dimensional groups that involve both material and loading parameters are identified. For both non-dimensional groups, with all parameters fixed except for bar size, it is found that for sufficiently small bars, the notch triggers necking, whereas for sufficiently large bars necking ultimately occurs away from the notch. With material properties fixed, for one non-dimensional group the transition to necking away from the notch corresponds to increasing imposed velocity whereas for the other non-dimensional group this transition takes place for decreasing imposed strain rate. Both these transitions correspond to increasing bar size. The results indicate that this transition is governed by material inertia but the bar size at which it occurs depends on the material properties, particularly strain hardening and strain rate hardening.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanics of Materials - Volume 116, January 2018, Pages 180-188
نویسندگان
,