کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7214606 | 1469467 | 2018 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of vacuum thermal cycling on the compression and shear performance of composite sandwich structures containing pyramidal truss cores
ترجمه فارسی عنوان
اثر دوچرخه سواری حرارتی خلاء بر عملکرد فشاری و برشی ساختارهای ساندویچ کامپوزیتی حاوی هسته های هسته ای هرمی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فیبر کربن / اپوکسی کامپوزیت، پانل های ساندویچ کامپوزیتی با هسته های هسته ای هرمی، خلاء حرارتی دوچرخه سواری، ویژگی های مکانیکی،
ترجمه چکیده
پانل های ساندویچی هسته مرکب ترکیبی، که در آن هسته شبکه توسط قاب های تقویت شده بین گره های پراکنده تقویت می شود، از طریق برش و اتصال متقابل آب جت ساخته شده است. ضرایب انبساط حرارتی و ضایعات خام (ضریب تلفات) لمینیت کامپوزیت تعیین شد. در ادامه، اثر دوچرخه برقی حرارتی خلاء بر عملکرد فشاری و برشی پانل های ساندویچ کامپوزیت با هسته های هسته ای هرمی با استفاده از روش های نظری و تجربی مورد بررسی قرار گرفت. به طور خاص، سختی و قدرت فشرده سازی فشرده خارج از فضا، و همچنین سختی برشی و استحکام سازه هایی که تحت دوچرخه سواری حرارتی خلاء قرار می گیرند، با استفاده از معادلات نظری پیش بینی شده است. عملکرد فشرده سازی و برش در ابتدا بهبود یافت و سپس با افزایش زمان چرخش حرارتی خلاء بدتر شد. حالت های شکست مشاهده شده به تعداد چرخه های حرارتی خلاء بستگی داشت. علاوه بر این، واکنش فاجعه بار پانلهای ساندویچ کامپوزیتی با هسته های هسته ای هرمی مورد بررسی قرار گرفت و حالت های شکست آنها ممکن بود (از جمله خم شدن و انقباض موضعی ترک های کامپوزیتی) با نتایج مدل سازی تحلیلی تکمیل شد. هسته های تراس عمدتا به علت فرآیند خرد کردن و محلی شدن-خم شدن، ناشی از ماتریس بیرون زدن و خرد کردن رابط بین الیاف کربن و رزین اپوکسی، پس از دوچرخه سواری حرارتی طولانی مدت است.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
Composite pyramidal-truss core sandwich panels, in which the lattice core is strengthened by reinforced frames between dispersive nodes, were manufactured via water-jet cutting and interlocking assembly. The coefficients of thermal expansion and outgassing (mass loss) ratios of the composite laminates were determined. Subsequently, the effect of vacuum thermal cycling on the compression and shear performance of the composite sandwich panels with pyramidal-truss cores was studied using theoretical and experimental methods. In particular, the out-of-plane compression stiffness and strength, as well as the shear stiffness and strength of the structures subjected to vacuum thermal cycling, were predicted using theoretical equations. The compression and shear performance improved initially and then deteriorated with an increase in the vacuum thermal cycling-time. The observed failure modes depended on the number of vacuum thermal cycles. In addition, the catastrophic response of the composite sandwich panels with pyramidal-truss cores was investigated, and their possible failure modes (including the crushing and localized buckling of composite struts) were complemented with results of analytical modeling. The truss cores collapsed mainly due to crushing and localized-buckling processes, caused by matrix outgassing and debonding of the interface between the carbon fibers and epoxy resin, after prolonged thermal cycling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Science and Technology - Volume 158, 12 April 2018, Pages 67-78
Journal: Composites Science and Technology - Volume 158, 12 April 2018, Pages 67-78
نویسندگان
Xiaodong Li, Jian Xiong, Li Ma, Linzhi Wu, Xiangqiao Yan,