کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7215190 | 1469502 | 2016 | 29 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface properties and fibre-matrix adhesion of man-made cellulose epoxy composites - Influence on impact properties
ترجمه فارسی عنوان
خواص سطح و چسبندگی فیبر ماتریس کامپوزیت های اپوکسی سلولز ساخته شده - تاثیر بر خواص ضربه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
To reveal a possible explanation for this effect the fibre surface properties were investigated more closely. AFM measurements showed no differences in fibre surface topologies. However the physico-chemical properties of the fibre types differ. IGC measurements showed that the standard Cordenka fibre without avivage (“std wo a.”) possesses a slightly higher specific surface energy and base number (Kb) than the CR fibres without avivage (“CR wo a.”) resulting in a better adhesion to the highly polar epoxy. This is also shown by the pair specific interaction parameters (Isp) and the work of adhesion. Both are clearly higher for the epoxy - “std wo a.” pair. Accordingly the measured fibre pull-out lengths of the CR fibres are one order of magnitude higher than of the std suggesting a weaker interfacial shear strength between the CR fibres and epoxy. Within the same fibre type the samples without avivage show longer pull-out lengths. As a weaker fibre-matrix adhesion causes stronger crack deflection and energy dissipation these results correspond well with the previously measured Charpy impact strengths.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Science and Technology - Volume 123, 8 February 2016, Pages 163-170
Journal: Composites Science and Technology - Volume 123, 8 February 2016, Pages 163-170
نویسندگان
A. Mader, A. Kondor, T. Schmid, R. Einsiedel, J. Müssig,