A peculiarity of silver-based corona wire heating on ozone generation

The effect of corona wire temperature on the ozone generation in the positive dc corona electrostatic precipitator is studied experimentally. The external heating of the corona wire can suppress the ozone generation. In this study, nichrome and two kinds of silver-based wires 0.1 mm diameter were tested as discharges electrodes. The nichrome corona wire heating shows a well-known monotonic decreasing the rate of ozone production. In the case of the tested silver-based wires the rate of ozone production decreases nonlinearly and passes through a local minimum in the range from 35 to 55 °C with increasing the wire temperature. At the wire temperature about 46 °C ozone generation by positive dc corona discharge is decreased by 53% with Ag:Mn = 0.85:0.15 wire and by 25% with Ag:Ni = 0.7:0.3 wire as compared to the same wire at 26 °C. Under these conditions the corona wire heating increases slightly the corona current and speed of airflow.

► The effect of positive corona wire temperature on the ozone generation is studied.
► The Ni:Cr wire heating shows a well-known monotonic decreasing the ozone production.
► For the silver-based wires the ozone production passes a local minimum at 35–55 °C.
► At the Ag:Mn=0.85:0.15 wire temperature ≈46 °C ozone generation is decreased by 53%. The corona wire heating increases slightly the corona current and speed of airflow.