Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor for large-load robotic manipulator

This paper presents research on dynamic characteristics of a piezoelectric six-dimensional heavy force/moment sensor for a large-load robotic manipulator. The theory on dynamic characteristics of the sensor structure is analyzed, and a mathematical model of the sensor dynamics, decoupled into separate vibration modes, is provided. This model is complemented by dynamic mode analysis of the sensor by finite-element modeling (FEM; ANSYS software). A dynamic calibration experiment is designed, and methods and principles for measurements and data analysis are provided. The characteristic dynamic vibration modes of the piezoelectric force/moment sensor are extracted by analyzing experimental data, yielding amplitude frequency and phase frequency curves of the transfer function linking the excitation loads with the output signals of the transducer. The results of the dynamic calibration experiment demonstrate the good dynamic characteristics of the piezoelectric six-dimensional heavy force/moment sensor. The natural frequencies in the three force directions are high, with values close 2000 Hz. This demonstrates the applicability of the presented six-dimensional heavy force/moment sensor to large industrial robotic manipulators.

► Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor.
► The development of a dynamic model is presented.
► Validation is conducted by comparing with experimental results.
► The natural frequencies in each force directions are high, with values close 2000 Hz.
► The applicability of the presented sensor to large industrial robotic manipulators.