کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7545260 | 1489595 | 2018 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Comparative Study of Part Characteristics Built Using Additive Manufacturing (FDM)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
It is found from the experimental results that the FDM process gives lowest surface roughness across the length is obtained for specimens built with orientation along YZ0, 100% infill and at 0.30 mm layer thickness. The sand paper polishing method yielded an immense improvement in the surface finish of the specimen. Increase in productivity i.e reduce in production time is obtained at 0.30 mm layer thickness, 20% infill at XY0 orientation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Manufacturing - Volume 20, 2018, Pages 73-78
Journal: Procedia Manufacturing - Volume 20, 2018, Pages 73-78
نویسندگان
Madhuri Chaudhari, Bhagwan F. Jogi, R.S. Pawade,