کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
761390 896625 2011 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental performance of a liquid desiccant dehumidification system under tropical climates
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
پیش نمایش صفحه اول مقاله
Experimental performance of a liquid desiccant dehumidification system under tropical climates
چکیده انگلیسی

The current energy crisis, climate change and increased air conditioning demands have generated a need for developing technologies based on renewable energy sources. Foremost amongst the cooling technologies are the sorption technologies working on low grade heat that can be supplied by solar energy. Liquid desiccant technologies seem to be a promising option as these tend to have higher thermal COPs, lower regeneration temperatures, facilitate simultaneous cooling and ease of storage of concentrated desiccant that can be used during the nonsunshine hours. But few concerns like carryover of liquid desiccant in air require further investigations. The liquid desiccant system under study incorporates a double channelled exchanger for air to liquid desiccant heat and mass transfer. It provides a large surface area for air/desiccant contact and reduces the carryover as direct contact between desiccant and air is minimized unlike spray towers, packed bed and falling film designs. Desiccant is heated in a plate heat exchanger using hot water and then regenerated in a regenerator. The set-up comprises of a dehumidifier, along with a regenerator, a cooling tower, plate heat exchangers and a control unit. Experiments were conducted on the system using calcium chloride and lithium chloride as desiccants by varying parameters like inlet air conditions, hot water temperature and desiccant concentration in order to evaluate the performance of the system under different operating conditions. The performance of the system is presented in terms of moisture removal rates, dehumidifier and regenerator effectiveness.

Research highlights
► Indirect contact between air and desiccant using a porous surface to avoid carryover.
► Humidity effectiveness and moisture removal rate reported under varying conditions.
► Humidity effectiveness with LiCl as desiccant in the range 0.36–0.45.
► Mass transfer characteristic of contactor surface restricted system performance.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 52, Issue 6, June 2011, Pages 2461–2466
نویسندگان
, , ,