کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
761516 | 896636 | 2010 | 7 صفحه PDF | دانلود رایگان |
The combination of premixed charge compression ignition and conventional direct-injection compression ignition combustion is studied in a DME engine. This combustion mode is referred to as PCCI-DI combustion. The pilot quantity is found to be one of main variables affecting the PCCI-DI combustion. So, the main objectives of this paper are to examine the effect of different DME pilot quantities on combustion and emission characteristics in a single-cylinder direct-injection DME engine and to determine whether PCCI-DI is a viable in-cylinder NOx emissions reduction technology. In order to evaluate the characteristics of PCCI-DI combustion, the conventional direct-injection compression-ignition engine performance is supplied to make a comparison with their results. Furthermore, special emphasis is put upon the combined combustion process analysis. Results show that DME engine can operate at a wide range of speeds and loads at PCCI-DI mode. In comparison to the conventional DME CI combustion, the brake thermal efficiency slightly increases for DME PCCI-DI operation. PCCI-DI is capable to decrease NOx effectively for all loads. NOx emission shows an obviously descending tendency with an increase in DME pilot quantity at low loads, while it shows a mildly elevating tendency with an increase in DME pilot quantity at high loads. HC and CO emissions increase for DME PCCI-DI operation under various DME pilot quantities.
Journal: Energy Conversion and Management - Volume 51, Issue 4, April 2010, Pages 648–654