Multi-objective analytical model for optimal sizing of stand-alone photovoltaic water pumping systems

• An analytical optimal sizing model is proposed for PV water pumping systems.
• The objectives are chosen as deficiency of power supply and life-cycle costs.
• The crop water requirements are estimated for a citrus tree yard in Antalya.
• The optimal tilt angles are calculated for fixed, seasonal and monthly changes.
• The sizing results showed the validity of the proposed analytical model.

Stand-alone photovoltaic (PV) water pumping systems effectively use solar energy for irrigation purposes in remote areas. However the random variability and unpredictability of solar energy makes difficult the penetration of PV implementations and complicate the system design. An optimal sizing of these systems proves to be essential. This paper recommends a techno-economic optimization model to determine optimally the capacity of the components of PV water pumping system using a water storage tank. The proposed model is developed regarding the reliability and cost indicators, which are the deficiency of power supply probability and life-cycle costs, respectively. The novelty is that the proposed optimization model is analytically defined for two-objectives and it is able to find a compromise solution.The sizing of a stand-alone PV water pumping system comprises a detailed analysis of crop water requirements and optimal tilt angles. Besides the necessity of long solar radiation and temperature time series, the accurate forecasts of water supply needs have to be determined. The calculation of the optimal tilt angle for yearly, seasonally and monthly frequencies results in higher system efficiency. It is, therefore, suggested to change regularly the tilt angle in order to maximize solar energy output. The proposed optimal sizing model incorporates all these improvements and can accomplish a comprehensive optimization of PV water pumping systems. A case study is conducted considering the irrigation of citrus trees yard located in Antalya, Turkey. The proposed model is also compared with a computational method and it is shown that sizing results are technically and economically more suitable than computational algorithm according to the applications on a 5-yearly basis.