کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
772203 | 1462896 | 2013 | 11 صفحه PDF | دانلود رایگان |
It is well known that cavitation phenomenon in diesel injector nozzles has a strong influence on the internal flow during the injection process and spray development. However, its influence on the flow during needle opening and closing remains still unclear due to the huge difficulties related to performing experiments at partial needle lifts.In this paper, an extended computational study has been performed in a multi-hole nozzle modeling 10 different fixed needle lifts. The internal flow has been modeled with a continuum nozzle flow model that considers the cavitating flow as a homogeneous mixture of liquid and vapour. Due to high Reynolds numbers, turbulence effects have been taken into account by RANS methods using a RNG k–ε model.Firstly, the code has been validated against experimental data at full needle lift conditions in terms of mass flow, momentum flux and effective velocity, showing a fairly good agreement with experimental results.Once the code has been validated, it has been possible to study in depth the internal nozzle flow and its characteristics at the outlet at different partial needle lifts. Nevertheless, not only the main flow features have been explained, but also the cavitation appearance and the turbulence development, which present huge differences between the different needle lifts simulated.
► A study about the influence of the needle lift on the internal flow has been done.
► The internal flow and cavitation phenomenon has been modeled with a mixture model.
► The code has been validated against experimental data at full needle lift conditions.
► Mass flow, momentum flux, velocity, cavitation and turbulence have been analyzed.
Journal: Energy Conversion and Management - Volume 66, February 2013, Pages 246–256