کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7732585 | 1497948 | 2015 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells
ترجمه فارسی عنوان
سلول های سوختی اکسید جامد با استفاده از اصلاح ساختار متان بر روی سلول های آلیاژ آهن نیکل
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سلول سوختی اکسید جامد پشتیبانی شده از فلز، آند نیکل آلیاژی، ریفینگ متان بر روی سلول، رسوب کربن،
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
چکیده انگلیسی
Ni0.9Fe0.1-supported solid oxide fuel cells are fabricated by tape casting-screen printing-sintering process; and the activity for CH4 reforming and electrochemical performance are examined with wet (3 vol.% H2O) CH4 as the fuel at 650 °C, in comparison with Ni-supported cells. At a flow rate of 100 ml minâ1, the wet CH4 is partially (35 vol.%) reformed to H2, CO and CO2 in the Ni0.9Fe0.1 anode-support, demonstrating a higher reforming activity than that of the Ni anode-support. The maximum power density is 1.01 Wcmâ2 at a high limiting current density of 2.6 A cmâ2; and cell voltage at 0.4 A cmâ2 is slightly decreased from 0.65 to 0.60 V within 50 h durability test. This high performance is attributed to the Ni0.9Fe0.1 anode-support that is more active for CH4 reforming and resistant to carbon deposition than its Ni counterpart.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Power Sources - Volume 284, 15 June 2015, Pages 446-451
Journal: Journal of Power Sources - Volume 284, 15 June 2015, Pages 446-451
نویسندگان
Kai Li, Lichao Jia, Xin Wang, Jian Pu, Bo Chi, Li Jian,