کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7735604 | 1497961 | 2014 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparing two-dimensional nano-catalytic combustion patterns using direct inkjet printing
ترجمه فارسی عنوان
آماده سازی الگوهای احتراق نانو کاتالیست دو بعدی با استفاده از چاپ مستقیم جوهر افشان
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
احتراق کاتالیستی، کاتالیزور الگو منبع حرارت میکرو، چاپ جوهر افشان
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
چکیده انگلیسی
Two-dimensional catalytic combustion patterns, which can be used as heat source in micro-nano scale MEMS devices such as gas sensor and micro-generator, are fabricated by inkjet printing (IJP). The performances of the catalytic patterns are evaluated by both traditional catalytic activity measurement and infrared thermography (IR) camera. Results show that ultra-low (0.014 mg cmâ2) loading and high utilizing (34,710 mW mgâ1) of Pt catalysts can be achieved by inkjet printing method. Spontaneous combustion is also observed for the printed Pt/Al2O3 powder membrane at rather low initiation temperature and small scale. The IR camera analysis indicates the uniform temperature distribution and rapid temperature response of the micro-patterned catalyst surface. With the advantages of the inkjet printing, this new direct-write method would, in principle, open up possibilities of these special catalyst patterns serving as micro energy sources for MEMS applications.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Power Sources - Volume 271, 20 December 2014, Pages 174-179
Journal: Journal of Power Sources - Volume 271, 20 December 2014, Pages 174-179
نویسندگان
Xi Luo, Zhigang Zeng, Xiaohong Wang, Jinhua Xiao, Zhongxue Gan, Hao Wu, Zhiyu Hu,