Fatigue life prediction for toe ground welded joints

The paper presents the results of an investigation of the effect of weld toe burr grinding on the fatigue performance of non-load-carrying transverse fillet welded joints. Crack initiation and propagation were monitored by a modified replica method. It was found that, although the average life increase due to toe grinding was in agreement with published data, the majority of the fatigue cracks in specimens that gave fatigue lives <∼106 cycles initiated at flaws just beneath the ground surface. Both the experiments and calculations based on fracture mechanics suggested that the fatigue lives of the toe ground joints in this life regime were dominated by the crack propagation process. However, in the long life regime (>106 cycles), crack initiation became significant. Reasonable estimates of the crack initiation period were made using the local stress approach proposed by Lawrence et al. [Lawrence FV, Mattos RJ, Higashida Y, Burk JD. Estimating the fatigue crack initiation life of welds. In: Hoeppner DW, editor, Fatigue Testing of Weldments, ASTM STP 648, American Society for Testing and Materials; 1978, p. 134–58]. The investigation suggested that more benefit from weld toe grinding could be claimed in the long (N > 106 cycles) than the short life regime.