کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
777189 | 1463515 | 2010 | 12 صفحه PDF | دانلود رایگان |
The influence of stress-reduction methods on the strength of adhesively bonded joints composed of brittle adherends was studied. Experimental and numerical investigations were carried out on two types of adherends: (a) fibre reinforced polymers and (b) timber, considering three different stress-reduction methods: (i) adhesive roundings, (ii) chamfering and (iii) adhesive grading. The experiments showed that the increase in strength using these stress-reduction methods is negligible. Numerical analyses showed that although the stress peaks are reduced, these act over a larger volume. A probabilistic strength prediction method is applied, which explains most of the experimental results. The presented work allows for a better insight into the relation between stress reduction and strength increase of adhesively bonded joints, which are greatly affected by the brittleness of the adherends.
Journal: International Journal of Adhesion and Adhesives - Volume 30, Issue 7, October 2010, Pages 583–594