Solute cluster size effect on the fatigue crack propagation resistance of an underaged Al–Cu–Mg alloy

• The number density and size of the Cu–Mg clusters were influenced by aging time.
• Estimation of the critical shear stress of Cu–Mg clusters by modulus hardening.
• The FCP resistance increased with the increased number density of large clusters.
• The present of S′ phase induced a degradation of the FCP resistance.

The effect of Cu–Mg cluster size and number density on the fatigue fracture behavior of Al–Cu–Mg alloy with various aging conditions was investigated by means of transmission electron microscopy (TEM), atom probe tomography (APT), scanning electron microscopy (SEM) and fatigue testing. Results showed that the fatigue crack propagation (FCP) resistances of 170 °C/1 h and 170 °C/8 h samples were higher than that of 170 °C/0.5 h sample due to increased number density of great size Cu–Mg co-clusters (>50 atoms). These large clusters were harder to dissolve during cycle deformation, thus reduced the cyclic softening effect and enhanced the FCP resistance. Moreover, as aging prolonged, the critical shear stress (τm) of co-clusters by modulus hardening increased from 10.2 (MPa) in 170 °C/0.5 h sample to 12.4 in 170 °C/1 h sample and 12.1 in 170 °C/8 h sample. Thus the force required for the movement of dislocations impeded by co-clusters, as well as the resistance of FCP caused by co-clusters, in 170 °C/1 h and 170 °C/8 h sample was higher than that in 170 °C/0.5 h sample. The 170 °C/8 h sample possessed the lower FCP resistance than 170 °C/1 h sample because of the existence of S′ phase. S′ phase was a kind of semi-coherent unshearable precipitate and hence reduced the planar-reversible slip.