High-temperature fatigue behaviour of a second generation near-γ titanium aluminide sheet material under isothermal and thermomechanical conditions

The high-temperature deformation behaviour of a second generation γ-TiAl sheet material with near-γ microstructure was characterised under tensile, creep, isothermal and thermomechanical fatigue (TMF) loading conditions. Test temperature ranged from 500 to 750 °C in isothermal tests and these temperatures were also used as minimum and maximum temperature of in-phase (IP) and out-of-phase (OP) thermomechanical fatigue tests. Under tensile loading, a ductile-to-brittle transition temperature (DBTT) of about 650 °C was observed. At this temperature the material experiences a temperature dependent change in the fracture morphology. Creep tests carried out in the temperature range from 650 to 800 °C under true constant stress conditions revealed a temperature and stress dependence of the Norton stress exponent n and the apparent activation energy for creep Qapp. With increasing temperature, isothermal fatigue life at constant strain amplitude decreased in vacuum, but increased in air indicating an abnormal (inverse) environmental effect. Under IP loading, fatigue is characterised by cyclic softening due to dynamic recrystallisation. OP loading drastically reduces fatigue life and turned out to be an extremely critical loading situation for γ-TiAl alloys.