Elastic–plastic stress analysis of an orthotropic rotating disc

In this study, the elastic–plastic stress analysis of a curvilinearly orthotropic rotating annular disc is investigated analytically for strain-hardening material behavior. To be able to see the separation of the plastic region, a few angular velocities are taken into consideration for such an analysis. Radial and circumferential stress components are obtained to increase angular velocity. It is seen that the magnitudes of the circumferential stress components are higher than those of the radial stress components. The magnitudes of the residual stress component of the circumferential stress and plastic flow are the highest at the inner surface. The radial displacements in both the elastic and plastic solutions calculated analytically have higher values at the inner surface than those of the outer surface for all the angular velocities.