Release of celecoxib from a bi-layer biomimetic tendon sheath to prevent tissue adhesion

Posttraumatic tendon adhesion limits the motion of the limbs greatly. Biomimetic tendon sheaths have been developed to promote tendon healing and gliding. However, after introduction of these biomaterials, the associated inflammatory responses can decrease the anti-adhesion effect. Celecoxib is a non-steroidal anti-inflammatory drug (NSAID) that can decrease inflammation responses. We blended hyaluronic acid and poly(l-lactic acid)-polyethylene glycol (PELA) with microgel electrospinning technology to form an inner layer of a bi-layer biomimetic sheath using sequential electrospinning of an outer celecoxib-PELA layer. Electrospun bi-layer fibrous membranes were mechanically tested and characterized by morphology, surface wettability, and drug release. The tensile strength showed a decreased trend and water contact angles were 114.7 ± 3.9°, 103.6 ± 4.4°, 116.3 ± 5.1°, 122.8 ± 4.7°, and 126.5 ± 4.2° for the surface of PELA, hyaluronic acid-PELA, 2, 6, and 10% celecoxib-PELA electrospun fibrous membranes, respectively. In vitro drug release studies confirmed burst release and then sustained release from the fibrous membranes containing celecoxib for 20 days. In a chicken model of flexor digitorum profundus tendon surgery, the outer celecoxib/PELA layer offered advanced anti-adhesion roles compared to the outer PELA layer and the inner hyaluronic acid-loaded PELA layer still offered tendon healing and gliding. Thus, celecoxib-loaded anti-adhesive tendon sheaths can continuously offer bi-layer biomimetic tendon sheath effects with celecoxib release from the outer layer to prevent tendon adhesion.