کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
787543 1466125 2009 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
پیش نمایش صفحه اول مقاله
Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen
چکیده انگلیسی

The distribution of residual stress in three orthogonal directions has been measured within a Type 316L austenitic stainless steel bead-on-plate weld specimen. Neutron diffraction was employed using the ENGIN-X instrument, located at the ISIS spallation facility of the Rutherford Appleton Laboratory, UK. A stress-free lattice parameter reference value was determined from a small cube, extracted from a far corner of the plate. A high magnitude of tensile residual stress was found along the weld bead in the longitudinal and transverse directions. The distributions of stress along through-thickness lines at the weld bead nominal start and stop locations and at the mid-length position showed an almost identical stress variation. However, a map of measured residual strain in the transverse direction beneath the weld bead revealed a concentration of strain located several millimetres before the nominal weld stop position where through-wall stress profiles were measured.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Pressure Vessels and Piping - Volume 86, Issue 1, January 2009, Pages 13–19
نویسندگان
, , , ,