Optimization of mechanical and tribological properties of carbon fabric/resin composites via controlling ZnO nanorods morphology

The multi-scale reinforcements of ZnO nanorods/carbon fabric with different morphologies were obtained using a simple water bath method via controlling the concentration of growth solution for a new application in wet friction materials. The ZnO nanorods/carbon fabric were characterized via X-ray diffraction, Scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectra. As a result, the ZnO nanorods/carbon fabric/resin composite (sample CP3) possesses the maximum bending and tensile strength of 62.7 MPa and 170.0 MPa, which increases by 40.2% and 59.1% compared with that of bare carbon fabric/resin composite due to the best mechanical interlocking and chemical adhesion at the interfacial region of the composite. Meanwhile, the wear rate of the sample CP3 decreases obviously by 81.5% together with stable friction coefficient under various friction condition. From view point of material design, it is necessary to control the morphologies of ZnO nanorods to optimize mechanical and tribological properties of ZnO nanorods/carbon fabric/resin composites.