کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7894250 | 1509967 | 2017 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of non-wetting surfaces on zinc surface as corrosion barrier
ترجمه فارسی عنوان
ساخت سطوح غیر مرطوب روی سطح روی به عنوان مانع خوردگی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
Two kinds of non-wetting surfaces, super-hydrophobic surface (SHS) and slippery lubricant-infused porous surface (SLIPS), were fabricated on zinc surface with hydrothermal method. Their surface properties were characterized with FE-SEM, XRD, XPS and contact angle meter, and their corrosion protection performances were evaluated with electrochemical measurements. It was demonstrated that both kinds of surfaces present high corrosion resistance to the underlying zinc substrate for the air (or lubricant) layer trapped in film. In comparison with SHS, the SLIPS presents advantage in maintaining stability in corrosive medium. This research provides guidance for the selection of non-wetting surface in practical corrosion protection application.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Corrosion Science - Volume 128, November 2017, Pages 110-119
Journal: Corrosion Science - Volume 128, November 2017, Pages 110-119
نویسندگان
Peng Wang, Tianping Li, Dun Zhang,