کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7896174 | 1510018 | 2013 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The role of aluminum distribution on the local corrosion resistance of the microstructure in a sand-cast AM50 alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Site-specific analytical electron microscopy was performed on a corroded sand-cast AM50 alloy. Areas close to partially divorced eutectic were the regions with less corrosion damage. The corrosion product layer in these areas consisted of a columnar section of predominantly amorphous MgO. At the alloy interface, an aluminum-rich layer was identified. Electron energy-loss spectroscopy suggests this layer is metallic in character. The corrosion product film on the primary α-Mg grains possessed a bi-layer morphology: a thin columnar film and a thicker, porous sub-layer. The formation of the Al-rich layer depends on the Al content in solid solution at a specific location.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Corrosion Science - Volume 77, December 2013, Pages 151-163
Journal: Corrosion Science - Volume 77, December 2013, Pages 151-163
نویسندگان
Mohsen Danaie, Robert Matthew Asmussen, Pellumb Jakupi, David W. Shoesmith, Gianluigi A. Botton,