کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7896481 | 1510022 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterisation of oxide films formed on Co-29Cr-6Mo alloy used in die-casting moulds for aluminium
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Oxide films formed at 700 °C on Co-29Cr-6Mo alloy were characterised extensively to improve the corrosion resistance of the alloy to liquid Al, enabling its use in Al die-casting moulds. Film of duplex layer consisting of an outer CoO-rich layer and an inner Cr2O3-rich layer was observed in samples subjected to oxidation for 4 h. With an increase in duration of oxidation, CoO was gradually replaced by Cr2O3, resulting in a single-layered oxide film dominantly composed of Cr2O3. The oxide film evolved with duration of oxidation treatment indicating the possibility of optimising films for Al die-casting moulds.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Corrosion Science - Volume 73, August 2013, Pages 72-79
Journal: Corrosion Science - Volume 73, August 2013, Pages 72-79
نویسندگان
Yunping Li, Ning Tang, Phacharaphon Tunthawiroon, Yuichiro Koizumi, Akihiko Chiba,