کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
793187 | 902385 | 2013 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds](/preview/png/793187.png)
چکیده انگلیسی
The load on flange castings in sand molds was gradually increased beginning from the end of the solidification process until the final cooling stage. The maximum tensile load on the flange castings in furan sand molds was larger than that of the flange castings in green sand molds. With the furan sand mold, permanent deformation in the flange castings occurred beginning from the end of the solidification process until reaching a temperature of approximately 250 °C. The mechanical interaction between the casting and the sand mold should be considered for more accurate stress calculations, particularly in furan sand molds.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 213, Issue 2, February 2013, Pages 238–244
Journal: Journal of Materials Processing Technology - Volume 213, Issue 2, February 2013, Pages 238–244
نویسندگان
Yuichi Motoyama, Hiroki Takahashi, Yuki Inoue, Keita Shinji, Makoto Yoshida,