کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7951951 | 1513702 | 2018 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Partial melting behavior and thixoforming properties of extruded magnesium alloy AZ91 with and without addition of SiC particles with a volume fraction of 15%
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
شیمی مواد
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A series of reheating-isothermal holding experiments and compression tests were conducted on pristine magnesium alloy AZ91 extruded by equal channel angular extrusion (ECAE) and SiC particles (a volume fraction of 15%) reinforced AZ91 composite (AZ91-SiCp) by regular extrusion. Dissolution of eutectic compounds and partial melting of the α-Mg matrix occurred during the reheating of these materials. Spherical semisolid slurries of these materials were obtained when the reheating temperature and isothermal holding time were 550 °C and 20 s, respectively. The presence of SiCp in AZ91-SiCp not only caused lower liquid fractions of semisolid slurries but also resulted in higher values of flow stress during semisolid compression tests. Both AZ91 alloy and AZ91-SiCp composite exhibited better thixoforming properties at high temperatures. Segregation of SiCp did not occur during thixoforming of AZ91-SiCp composite after an isothermal holding at semisolid temperatures for 20 s.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Science & Technology - Volume 34, Issue 7, July 2018, Pages 1149-1161
Journal: Journal of Materials Science & Technology - Volume 34, Issue 7, July 2018, Pages 1149-1161
نویسندگان
Yu-Shi Yi, Yi Meng, Dan-Qing Li, Sumio Sugiyama, Jun Yanagimoto,